Pan/Tilt/Zoom

Table of Contents

Select Camera
Pan/Tilt/Zoom Property
Preset for selected camera

This configuration adjusts Pan/Tilt/Zoom devices connected to the camera.

Select Camera

This item selects a camera to configure Pan/Tilt/Zoom. The configurations of multiple cameras can be set by clicking check box which is in first column of each row. The changed configurations are applied to all of the cameras simultaneously when the check box of the first row which contains titles of each column is clicked. Untouched configuration items are not applied to all of the cameras.

Pan/Tilt/Zoom Configuration Screen

Figure 3.29. Pan/Tilt/Zoom Configuration Screen


Pan/Tilt/Zoom Property

  • Enabled

    This item decides whether Pan/Tilt/Zoom is used for the camera.

    [Note] Note
    This can be toggled only for capure cameras.
  • Protocol

    This item indicates Pan/Tilt/Zoom protocol of the camera.

    Supported protocols are following figure.

    Pan/Tilt/Zoom Protocol List

    Figure 3.30. Pan/Tilt/Zoom Protocol List


    [Note] Note
    This can be configured only for capture cameras.
  • Target Address

    This item indicates target address to send Pan/Tilt/Zoom command.

    [Note] Note
    This can be configured only for capture cameras.
  • Speed

    This item indicates speed of the camera when it recieved Pan/Tilt/Zoom command.
  • Serial Port

    Pan/Tilt/Zoom command is transmitted through a serial port. The serial port should be selected to transmit the command.

    [Note] Note
    This can be configured only for capture cameras.

Preset for selected camera

This item makes the camera to move to the remembered position or to the user-specified position.

  • Move

    This item executes a preset function. The camera will be moved to the remembered position after selecting the preset number and clicking this button. The preset function is also available at alarm/preset button in the main display.

  • Set

    Preset can exist on the camera already and you can specify any preset position as support from the camera. Available number of the preset is from one to 32 depending on the model. The number of the preset can be changed by using the button.

  • Reset

    This item resets the configuration of the preset to the default.